Crower 00426 cam with cast iron dist. gear option SOLD

[Paul P]

250.00 used on the dyno for 5 pulls and then pulled out. Excellent condition. Lists for 360.00+shipping without the cast gear option.
It is on Craigslist as well.
Specs are:
Part Number/Work Order Number 00426
Engine Application 262-400 CHEVY
Grind Number 288R

ADVERTISED CAMSHAFT SPECIFICATIONS:
INTAKE: Duration: 288º Lift: .570 Clearance Hot: .026
EXHAUST: Duration: 290º Lift: .584 Clearance Hot: .028

The specifications listed above are based on a rockerarm ratio of 1.50 IN
1.50 EX

RECOMMENDED VALVE SPRING INFORMATION:
Part # 36390-3 Single Dual X Triple
Approximate spring pressure: valve closed: 115/125 LBS.
valve open: 340/350 LBS.

17.0
BTDC 10.0
ATDC
ABDC
53.0 62.0
BBDC

The information below is for degreeing cam only. Correct only at .050" tappet lift.
INTAKE Opens: 17.0 BTDC
Closes: 53.0 ABDC
EXHAUST Opens: 62.0 BBDC
Closes: 10.0 ATDC

LOBE SEPERATION 112º

Duration at .050" Intake: 250
Exhaust: 252
LOBE LIFT Intake: .380
Exhaust: .389

If using "Lobe Center" method of degreeing, cam should be installed on an intake centerline of: 108º

These are off the Crower website