Home | Register | Login | Contact Us

 
Auto Math
Classifieds
Forum
Gallery
Games
Garage
Tech Articles
Utilites
 
FAQFAQ    SearchSearch    RegisterRegister    Log inLog in    Log in to check your private messagesLog in to check your private messages    Forum Subscriptions1/4 Mile Table 

Crower 00426 cam with cast iron dist. gear option SOLD

 
Post new topic   Reply to topic    SMOKEmUP.com Forum Index -> Parts For Sale
View previous topic :: View next topic  
Author Message
Paul P
Member


Joined: 15 Aug 2002
Posts: 2393
Location: Townsend, Mass.
points


1971 Chevrolet Chevelle

PostPosted: Tue Feb 24, 2009 1:54 pm    Post subject: Crower 00426 cam with cast iron dist. gear option SOLD Reply with quote

250.00 used on the dyno for 5 pulls and then pulled out. Excellent condition. Lists for 360.00+shipping without the cast gear option.
It is on Craigslist as well.
Specs are:
Part Number/Work Order Number 00426
Engine Application 262-400 CHEVY
Grind Number 288R

ADVERTISED CAMSHAFT SPECIFICATIONS:
INTAKE: Duration: 288 Lift: .570 Clearance Hot: .026
EXHAUST: Duration: 290 Lift: .584 Clearance Hot: .028

The specifications listed above are based on a rockerarm ratio of 1.50 IN
1.50 EX

RECOMMENDED VALVE SPRING INFORMATION:
Part # 36390-3 Single Dual X Triple
Approximate spring pressure: valve closed: 115/125 LBS.
valve open: 340/350 LBS.

17.0
BTDC 10.0
ATDC
ABDC
53.0 62.0
BBDC

The information below is for degreeing cam only. Correct only at .050" tappet lift.
INTAKE Opens: 17.0 BTDC
Closes: 53.0 ABDC
EXHAUST Opens: 62.0 BBDC
Closes: 10.0 ATDC

LOBE SEPERATION 112

Duration at .050" Intake: 250
Exhaust: 252
LOBE LIFT Intake: .380
Exhaust: .389

If using "Lobe Center" method of degreeing, cam should be installed on an intake centerline of: 108

These are off the Crower website

_________________
2001 Focus 2.0 Zetec
15.63@87 MPH 1/4mi
1971 - Chevelle 408 SBC N.A.
6.95@98.6 MPH 1/8mi
10.97@121 MPH 1/4mi
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    SMOKEmUP.com Forum Index -> Parts For Sale All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
Home | Contact Us | Automath | Cam Files | Dyno Search | Forum | Garage | Picture Gallery | Reaction Timer

Copyright 1997-2016 SMOKEmUP.com All rights reserved.
Advertising Info     Disclaimer     Privacy Policy