Ultradyne Solid Roller Cam w/cast gear option Not selling

Paul P · Last edited by Paul P on Sun Apr 15, 2012 11:04 am; edited 1 time in total

This is the cam out of my 406. It is in perfect shape. Has cast gear option so you don't have to run a bronze distributor gear. 250+ship

Big Dave · Posted: Thu Feb 17, 2011 7:00 pm Post subject:

What kind of springs are you running with that cam? I chose some PAC alloy springs sold by Lunati.

Big Dave

Paul P · Posted: Thu Feb 17, 2011 10:15 pm Post subject:

I was running some Comp cams 938-16 springs, Titanium retainers w/lash caps and a crower rev kit.

Pac's are for the new heads.

squeeezer · Posted: Fri Mar 23, 2012 8:44 pm Post subject:

What compression were you running with this?

Paul P · Posted: Fri Mar 23, 2012 10:00 pm Post subject:

11.75:1

Paul P · Posted: Sun Apr 15, 2012 11:02 am Post subject:

I'm going to keep this cam and complete top end that was on my 406 for a 350 LT1 short block I have been sitting on for long time. Should be pretty nasty if there is a need for a new/spare power plant.

If I had a rolling chassis I do have a complete drive train for another car.